1. TOP
  2. Job References
  3. Hirakata T-SITE

Hirakata T-SITE

Bronze-tone designs are used on the interior walls, including the escalator walls.
It blends in well with the brick-like walls and bookcases lining the space, while its soft luster and beautiful shades create a high-quality atmosphere.

  • Hirakata T-SITE construction photo 01

  • Hirakata T-SITE construction photo 02

  • Hirakata T-SITE construction photo 03

  • Hirakata T-SITE construction photo 04

  • Hirakata T-SITE construction photo 05

Case Information

Design
Takenaka Corporation
Installation
Takenaka Corporation and Maeda Gumi JV
Location
12-2 Okahigashicho, Hirakata City, Osaka Prefecture
Construction date
2016

Processing method used

Taking advantage of the properties of aluminum, it can be processed into a variety of shapes suitable for construction.

Cut Panels

By showing the sharp edges of the panel, it enhances the design sense and creates a luxurious feel.
・We recommend using 3mm thick sheets for the cut panels.
- If the thickness is 3mm, the marks left by the stud welding on the back side will not show on the surface.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.

Click here for details on the cut panel

Folding

Because the printing is done directly on the aluminium plate, the colour and pattern will stay in place even when it is bent. Unlike cut panels, no undercoat is required, which offers cost benefits.
・We recommend using 2mm thick plate material for bending.
・We recommend verifying the processing prior to mass production.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.

Click here for details on bending

Examples of similar products

Sectors

Features