Otemachi Building (Renewal)
We used a phosphate pattern with a dark, medium and light colour scheme to match distinctive themes such as "brick" and "stone wall," creating a harmonious and balanced renewed design for each.
Case Information
- Design
- Mitsubishi Jisho Design Co., Ltd.
- Installation
- Taisei Corporation
- Location
- 1-6-1 Otemachi, Chiyoda-ku, Tokyo
- Construction date
- 2018
The design used
Processing method used
Taking advantage of the properties of aluminum, it can be processed into a variety of shapes suitable for construction.
Folding
Because the printing is done directly on the aluminium plate, the colour and pattern will stay in place even when it is bent. Unlike cut panels, no undercoat is required, which offers cost benefits.
・We recommend using 2mm thick plate material for bending.
・We recommend verifying the processing prior to mass production.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.
Cut Panels
By showing the sharp edges of the panel, it enhances the design sense and creates a luxurious feel.
・We recommend using 3mm thick sheets for the cut panels.
- If the thickness is 3mm, the marks left by the stud welding on the back side will not show on the surface.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.
Examples of similar products
Sectors
Features
Free word search
Product name, application, product specifications, etc.