Metallic wood grain art aluminum is used for the corner pillars. Wood grain material is used for the exterior ceiling to coordinate with the wood grain pattern sheet on the interior ceiling. (Published in Shinkenchiku March 2016 issue)
Taking advantage of the properties of aluminum, it can be processed into a variety of shapes suitable for construction.
Because the printing is done directly on the aluminium plate, the colour and pattern will stay in place even when it is bent. Unlike cut panels, no undercoat is required, which offers cost benefits.
・We recommend using 2mm thick plate material for bending.
・We recommend verifying the processing prior to mass production.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.
By showing the sharp edges of the panel, it enhances the design sense and creates a luxurious feel.
・We recommend using 3mm thick sheets for the cut panels.
- If the thickness is 3mm, the marks left by the stud welding on the back side will not show on the surface.
- When cutting the plate, we recommend touching up the edges with ambient-drying fluorine paint.
Product name, application, product specifications, etc.
